Skip to content

QA: Viewing

Test cases for opening images, the toolbar, plot types, navigation, display settings, stacks, 3D views, the slice editor, intensity profiles and image export. See How to use the plan for IDs, priorities and recording results. Reference: Toolbar, Plot types, Navigation, Channels & Histogram, Stacks, volumes and 3D, Intensity profile lines.

Unless a case says otherwise, start from the live demo freshly loaded, in the primary browser, with WebGPU available.

Opening images and loading states

ID Title Pri Preconditions / data Steps Expected result
VIEW-001 Open a PNG sample P1 img01.png 1. Click img01.png in the gallery. The image opens in the Image view, fitted to the viewer. Minimap shows bottom-right. No error toast.
VIEW-002 Open a TIFF decoded in the browser P1 TIFF B16-69_O7_CFP-1_hyper.tif 1. Click the TIFF tile. 2. Wait for "decoding…" to clear. The image opens in the Image view. No error toast.
VIEW-003 Open a DICOM slice P1 micro-ct folder 1. Open the micro-ct folder. 2. Click case1_040.dcm. A grayscale slice opens in the Image view.
VIEW-004 Open a DICOM folder as a z-stack P1 micro-ct folder 1. Right-click any DCM tile. The whole folder loads as one z-stack: the toolbar shows a Slice slider and the text "z of max".
VIEW-005 Open a tiled whole-slide image P1 WSI CMU-1 1. Click the WSI CMU-1 tile. 2. Zoom in several steps. A low-resolution view appears quickly, then sharpens. Tiles load as you zoom; no white or missing tiles once loading settles.
VIEW-006 Loading overlay for a single image P2 WSI BC18 1. Click the tile and watch the viewer immediately. A spinner with "Loading image..." shows until the first view is drawn.
VIEW-007 "Sharpening preview..." overlay P3 A host image with a preview tier (JIT) 1. Open an image that has a small preview tier. While the low-resolution preview is on screen and the full tier loads, a translucent "Sharpening preview..." overlay shows; it clears when the full tier is drawn.
VIEW-008 Stack loading progress and Cancel P2 WSI Project002 · 2ch x 27z stack 1. Open the stack. 2. Pick Heatmap, then Stack mode. 3. Click Cancel while "Loading frames..." shows. A determinate progress bar with "Loading frames..." and a Cancel button show. Cancel stops loading and resets the slice to 0.
VIEW-009 Switching images keeps a 2D plot type P2 img01.png, img03.png 1. Open img01.png, pick Heatmap. 2. Open img03.png. img03.png opens in Heatmap (the 2D type carries over when it is still allowed).
VIEW-010 Switching images resets a 3D plot type P2 micro-ct z-stack, img01.png 1. Load the micro-ct z-stack, pick Volume. 2. Open img01.png. img01.png opens in Image; the camera mode is back to turntable.
VIEW-011 Error toast when an image cannot be drawn P3 A broken or unreachable image (JIT, or block the tile server in DevTools) 1. Block requests to the tile server. 2. Open a WSI. An error toast "Could not draw the image" with "<file>: <message>. Try opening it again." (or a sticky "An error occured" toast when the image info cannot be read). ⚠ see Known issues (KI-42).

Toolbar

ID Title Pri Preconditions / data Steps Expected result
VIEW-020 Toolbar contents in the Image view P1 img01.png 1. Open the image. 2. Hover each button. In order: drag handle, plot-type dropdown, Add an intensity line, Channels & Histogram, Smoothen, Download image as PNG, Fit to view, Zoom box, Pan, Zoom in, Zoom out, Region Editor and region tools, segmentation tools, Help. Each shows its tooltip.
VIEW-021 Tooltips show shortcuts P3 img01.png 1. Hover Zoom box, Pan, Zoom in, Zoom out. Tooltips read "Zoom box (b)", "Pan the image (p)", "Zoom in (+)", "Zoom out (-)", with the key rendered as a key cap.
VIEW-022 Detach the toolbar P2 img01.png 1. Press and drag the ≡ handle ("Drag to float the toolbar") into the image. The toolbar detaches into a floating window that follows the pointer; it starts at the top-left (8, 8) of the page and stays above the image. A pin button "Dock to top" appears.
VIEW-023 Dock the toolbar P2 Floating toolbar (VIEW-022) 1. Click the pin "Dock to top". The toolbar snaps back above the image.
VIEW-024 Floating toolbar is not clamped P3 Floating toolbar 1. Drag the floating toolbar towards the window edge and beyond. The toolbar can move partly or fully off-screen; Dock to top brings it back. ⚠ see Known issues (KI-08).
VIEW-025 Floating position is not remembered P3 Floating toolbar 1. Dock, then detach again. 2. Reload the page. Each new detach starts at (8, 8). After a reload the toolbar is docked.
VIEW-026 Help opens the user guide P1 Any image 1. Click the toolbar Help (question-mark circle). A new browser tab opens on the guide's Toolbar reference page. The viewer keeps its state.
VIEW-027 Help URL follows the host's docsUrl P2 JIT (or a host setting VIZ_CONFIG.docsUrl) 1. Click toolbar Help in JIT. The tab opens <docsUrl>reference/toolbar/ on the host's own documentation site, not the GitHub Pages copy.
VIEW-028 Host can hide toolbar groups P3 A host with toolbarTools (JIT processing pipeline, or developer build) 1. Open a viewer configured with specialTools: false / zoomTools: false / regionTools: false / help: false. specialTools:false hides the dropdown, Iso slider, intensity line, Channels & Histogram, Spatial omics, Smoothen, Download and Fit to view. zoomTools:false hides the 2D zoom buttons. regionTools:false hides region, segmentation and Slice editor buttons. help:false hides Help. 3D camera controls, stack controls and the context menu and shortcuts stay.

Plot types

ID Title Pri Preconditions / data Steps Expected result
VIEW-040 Plot types offered for an RGB image P1 img04.png 1. Open the plot-type dropdown. Exactly Image, Heatmap, Surface. Contour, Volume and Isosurface are not offered (RGB is not grayscale).
VIEW-041 Plot types offered for a grayscale slice P1 One micro-ct DCM slice 1. Open the dropdown. Image, Heatmap, Contour, Surface. No Volume or Isosurface (not a stack).
VIEW-042 Plot types offered for a grayscale z-stack P1 micro-ct z-stack 1. Open the dropdown. Image, Heatmap, Contour, Surface, Volume, Isosurface.
VIEW-043 Plot types offered for a multichannel stack P2 TIFF GFPA_IBA1_…_zstack 1. Open the dropdown. Volume and Isosurface are offered (multichannel counts as grayscale-compatible).
VIEW-044 Each entry shows its icon P3 micro-ct z-stack 1. Open the dropdown. Each entry has its icon: image, heatmap, contour, surface, cube, isosurface.
VIEW-045 Heatmap view P1 img01.png 1. Pick Heatmap. A Plotly heatmap with a colour bar replaces the image. Region tools stay available.
VIEW-046 Contour view P2 micro-ct slice 1. Pick Contour. Contour lines of the slice are drawn (grid downsampled to at most 400 cells per axis).
VIEW-047 Surface view P1 micro-ct slice; WebGPU 1. Pick Surface. 2. Drag to rotate. A 3D height field builds (a "… in 3D…" badge while building), and rotates with the mouse. 3D camera controls replace the 2D zoom tools.
VIEW-048 Surface works on RGB P2 img04.png; WebGPU 1. Pick Surface. The height field is built from luminance; no error.
VIEW-049 Volume view P1 micro-ct z-stack; WebGPU 1. Pick Volume. A maximum-intensity-projection volume renders in a 3D box with axes.
VIEW-050 Isosurface view P1 micro-ct z-stack; WebGPU 1. Pick Isosurface. An isosurface renders; the Iso band slider appears in the toolbar.
VIEW-051 Plot-type switch disarms the active tool P2 img01.png 1. Press r (rectangle armed). 2. Pick Heatmap. No region tool is highlighted after the switch.
VIEW-052 Unsupported type falls back to Image P2 img01.png then img04.png 1. On a grayscale image pick Contour. 2. Open the RGB img04.png. img04.png opens in Image (Contour is not offered for RGB).
VIEW-053 Test-mode plot types P3 Demo with ?test=1 (or a host with testMode) 1. Open micro-ct z-stack. 2. Open the dropdown. Labels carry their backend: "Image (OSD)", "Heatmap (Plotly)", "Volume (napari · WebGPU)"… and extra types are listed: Scatter 2D/3D (Plotly), Surface (Plotly), Isosurface (Plotly), Image (napari · WebGPU), Scatter 2D/3D (napari · WebGPU).
VIEW-054 3D types without WebGPU P2 micro-ct z-stack; WebGPU off 1. Pick Volume, Isosurface, Surface in turn. The view falls back to a Plotly rendering (or an equivalent drawing); no blank view and no uncaught error. The fallback is reported in the console only.
ID Title Pri Preconditions / data Steps Expected result
VIEW-070 Scroll to zoom (Image view) P1 WSI CMU-1 1. Scroll up over a feature. 2. Scroll down. Zooms in toward the pointer, out again, smoothly (about 1.03× per wheel event).
VIEW-071 Drag to pan P1 WSI CMU-1, zoomed in 1. Drag the image with no tool armed. The image pans with the pointer.
VIEW-072 Click to zoom P2 WSI CMU-1, no tool armed 1. Click a point once. 2. Shift-click. A click zooms in about 2× toward the clicked point; Shift-click zooms out.
VIEW-073 Click-to-zoom is off while a tool is armed P2 img01.png 1. Press r. 2. Click the image. The view does not zoom.
VIEW-074 Zoom in / out buttons and keys P1 img01.png 1. Click Zoom in, then Zoom out. 2. Press +, =, -, _. Each press zooms 1.3× in or out about the view centre. + and = zoom in; - and _ zoom out. ⚠ see Known issues (KI-01: OSD's own +/- may zoom twice when the canvas has focus).
VIEW-075 Zoom-out limit P3 img01.png 1. Zoom out repeatedly. Zooming out continues below the original size, down to about 1% of the view. ⚠ see Known issues (KI-15).
VIEW-076 Zoom-in limit P3 img01.png 1. Zoom in repeatedly. Zooming stops at about 20 screen pixels per image pixel.
VIEW-077 Zoom box P1 WSI CMU-1 1. Press b (or click Zoom box). 2. Drag a rectangle. While dragging, the outside is dimmed and the box has white corner marks. On release the view fits the box. The tool stays armed (button highlighted).
VIEW-078 Zoom box ignores tiny drags P3 WSI CMU-1, zoom box armed 1. Drag less than 5 px. Nothing happens.
VIEW-079 Pan tool toggle P2 img01.png 1. Press p. 2. Press p again. The Pan button highlights, then un-highlights.
VIEW-080 Fit to view (Image view) P1 WSI CMU-1, zoomed in 1. Click Fit to view. The whole image is fitted to the viewer. An armed tool stays armed. ⚠ see Known issues (KI-06).
VIEW-081 Fit to view (Heatmap) P2 img01.png, Heatmap, zoomed in 1. Press r. 2. Click Fit to view. The heatmap autoscales to the whole image; the armed tool is disarmed.
VIEW-082 Minimap P1 WSI CMU-1 1. Zoom in. 2. Look at the bottom-right. The minimap shows the whole slide with a red rectangle for the current view; it moves as you pan. It does not fade out.
VIEW-083 Scale bar P1 WSI CMU-1 (has a pixel size) 1. Zoom in and out. Bottom-left scale bar with a round length (1, 2 or 5 × 10ⁿ) in µm (or mm); it updates on every zoom.
VIEW-084 No scale bar without a pixel size P2 img01.png 1. Look at the bottom-left. No scale bar is shown.
VIEW-085 Smoothen toggle P2 img01.png 1. Zoom in until pixels are large. 2. Click Smoothen. 3. Click it again. By default pixels are crisp blocks. With Smoothen on, the button is filled with a white icon and the image is smoothed (bilinear). Off again: crisp blocks.
VIEW-086 Smoothen only in the Image view P3 img01.png 1. Pick Heatmap. The Smoothen button is not shown.
VIEW-087 Smoothen survives an image switch P3 img01.png, img03.png 1. Turn Smoothen on. 2. Open img03.png. Smoothen is still on.
VIEW-088 Heatmap high-definition zoom P2 WSI CMU-1, Heatmap 1. Use Zoom drag (magnifier) and drag a small box. The zoomed range is re-fetched at screen resolution; for an uncached file "Caching image..." shows briefly.
VIEW-089 Heatmap wheel zoom P2 img01.png, Heatmap 1. Scroll one notch with a mouse wheel. 2. Scroll on a trackpad. Each wheel event zooms a full 1.3× step about the view centre (not the pointer). On a trackpad zoom is very fast. ⚠ see Known issues (KI-02).
VIEW-090 Zoom drag only in Plotly views P3 img01.png 1. In Image view, look for Zoom drag. 2. Switch to Heatmap. Zoom drag (magnifier) is not shown in Image view; it is shown in Heatmap.
VIEW-091 Context menu: view entries (2D) P2 img01.png, no regions 1. Right-click the image. Entries: Autoscale, Zoom to box, Pan, Zoom in, Zoom out, then the region tools (Select, Freeform, Brush, Polyline, Rectangle, Wand, Vertex eraser, Polygon (click vertices), Add vertex, Delete vertex). The armed mode is highlighted.
VIEW-092 Context menu: Zoom selection in Heatmap P3 img01.png, Heatmap 1. Right-click the plot. Zoom selection is listed (it is not listed in the Image view). Polygon / Add vertex / Delete vertex are not listed.
VIEW-093 Keys go to the focused or hovered viewer P3 img01.png 1. Click into a text box elsewhere on the page. 2. Press r. Nothing happens while focus is in an input. After moving the pointer over the image and pressing r, the rectangle tool arms.
VIEW-094 OpenSeadragon built-in keys P2 img01.png, click the image first 1. Press r, f, 0, w, a, s, d. Record what happens. Known collisions: r may rotate the image 90°, f flip it, 0 go home, w a s d pan. ⚠ see Known issues (KI-01).

Channels & Histogram

ID Title Pri Preconditions / data Steps Expected result
VIEW-110 Open the dialog P1 img04.png 1. Click Channels & Histogram. A non-modal, draggable, resizable dialog "Channels & Histogram" (30rem wide; 90vw under 960 px). The image stays usable behind it.
VIEW-111 Available in every plot type P3 micro-ct z-stack 1. Switch through each plot type. The Channels & Histogram button is present in every plot type.
VIEW-112 Grayscale channel table P2 micro-ct slice 1. Open the dialog. One row "Intensity", no colour swatch, a Show checkbox.
VIEW-113 RGB channel table P1 img04.png 1. Open the dialog. Rows Red, Green, Blue, each with a colour swatch and a checked Show box; a "<channel> LUT" row with 7 swatches.
VIEW-114 Hide and show a channel P1 img04.png 1. Untick Show for Blue. 2. Tick it again. Blue disappears from the image (nuclei vanish), then returns.
VIEW-115 Only 4 channels visible by default P2 A host image with more than 4 channels (JIT) 1. Open the image and the dialog. The first 4 channels are shown, the others unticked (unless the server's descriptor says otherwise).
VIEW-116 Default multichannel names and colours P3 A multichannel image without channel metadata 1. Open the dialog. Channels are named "Channel N" and coloured red, green, blue, white, cyan, magenta, yellow in order.
VIEW-117 Channel groups P3 A host image with grouped channels (JIT) 1. Open the dialog. Group rows with a chevron, label and "(count)". The group checkbox is checked only when all its channels are shown; its tooltip reads "N of M shown"; toggling it shows or hides every channel in the group.
VIEW-118 Change a channel colour P2 img04.png 1. Click the Green swatch. 2. Pick a honeycomb cell. The picker closes and green structures take the new colour.
VIEW-119 Colour picker fields P3 img04.png, swatch open 1. Type #ff00ff in the hex field. 2. Type zz in the hex field. 3. Drag the H slider and release. A valid #RRGGBB applies; invalid text is ignored. Slider and number-field changes apply on release, not while dragging. R/G/B fields clamp to 0–255. Clicking outside closes the picker. ⚠ see Known issues (KI-43).
VIEW-120 LUT presets P2 img04.png 1. Select the Green row. 2. Click the Magenta LUT swatch. The Green channel is drawn in magenta. Swatch tooltips: Red, Green, Blue, Gray, Cyan, Magenta, Yellow.
VIEW-121 Histogram for the selected channel P1 img04.png 1. Click the Red row, then the Green row. The header reads "Histogram — Red" then "Histogram — Green"; 256 bins in the channel's colour; dotted cyan (Min) and red (Max) markers.
VIEW-122 Log histogram P3 img04.png 1. Tick Log. The y axis becomes log₁₀ ("log₁₀ count").
VIEW-123 Min / Max sliders (8-bit) P1 img04.png 1. Drag Min up to 50. 2. Type 200 in the Max field. Range 0–255, step 1. The image contrast changes live; the histogram markers move.
VIEW-124 Min can never exceed Max P2 img04.png 1. Set Max to 100. 2. Drag Min past 100. Max is pushed up with Min (and vice versa); Min ≤ Max always.
VIEW-125 Gamma P2 img04.png 1. Move Gamma to its ends. Range 0.1–5, step 0.01, shown with two decimals; default 1.00.
VIEW-126 Busy spinner while adjusting P3 img04.png 1. Drag Min. A small spinner shows next to the control and clears about 0.5 s after the last change.
VIEW-127 Auto contrast P1 WSI 2-channel fluorescence 1. Select a dim channel. 2. Click Auto. Min and Max move to saturate about 0.1% of pixels at each end; the channel becomes clearly visible.
VIEW-128 Reset P2 After VIEW-120 and VIEW-123 1. Click Reset. Min 0, Max 255 (or the native range), Gamma 1 and the channel's default tint are restored.
VIEW-129 Native (>8-bit) histogram P2 WSI 2-channel fluorescence 1. Open the dialog. The histogram axis and the Min/Max sliders use native units over the observed min–max (not 0–255); slider step is about range/255.
VIEW-130 Colormap list (grayscale only) P1 micro-ct slice 1. Open the Colormap selector. Tooltip "Color Lookup Tables". Groups: Sequential, Sequential (2), Perceptually Uniform Sequential, Diverging, Cyclic, Qualitative, Miscellaneous, each entry with a thumbnail. Default Greys Inv.
VIEW-131 Apply a colormap P1 micro-ct slice 1. Pick Viridis. The slice is drawn in Viridis.
VIEW-132 No colormap for RGB / multichannel P2 img04.png 1. Open the dialog. No Colormap selector is shown.
VIEW-133 Invert P2 micro-ct slice 1. Tick Invert. The display is inverted. There is no separate "reverse colormap" control. ⚠ see Known issues (KI-13).
VIEW-134 Hiding the only grayscale channel P3 micro-ct slice 1. Untick Show for Intensity. The image goes blank; nothing prevents it. ⚠ see Known issues (KI-09).
VIEW-135 Settings kept on re-plot, reset on new file P2 img04.png, img03.png 1. Change Gamma on img04.png. 2. Switch to Heatmap and back. 3. Open img03.png. Gamma is kept across the plot-type switch. img03.png opens with default settings.
VIEW-136 Display settings are not persisted P3 img04.png 1. Change Min/Max. 2. Reload the page and reopen img04.png. Defaults are back.
VIEW-137 Export composite (Image view) P2 WSI CMU-1 1. Click Export composite (PNG). A PNG <stem>_composite.png downloads: the largest pyramid level up to 32 MP, with the current display settings. Tiles that fail leave gaps.
VIEW-138 Export 16-bit TIFF P2 WSI 2-channel fluorescence 1. Select a channel with a >8-bit histogram. 2. Click Export 16-bit TIFF. Tooltip "Data-preserving multi-band TIFF (visible channels, native bit depth)". A file <stem>_16bit.ome.tif downloads. The button is not shown for 8-bit images.
VIEW-139 Live recolouring in every backend P3 img04.png 1. Open the dialog. 2. Switch to Heatmap and to Surface while changing Min. Every view recolours live from the same settings.

Download

ID Title Pri Preconditions / data Steps Expected result
VIEW-150 Download PNG (Image view) P1 img01.png, zoomed, with a region 1. Click Download image as PNG. img01.png-stem .png downloads: what is on screen (zoom and colours), without the region outlines, scale bar or minimap.
VIEW-151 Download PNG (Heatmap) P2 img01.png, Heatmap 1. Click Download image as PNG. A PNG of the Plotly chart downloads, named after the file (or image.png).
VIEW-152 Download PNG (napari views) P3 micro-ct z-stack, Volume 1. Click Download image as PNG. A screenshot of the 3D view downloads as napari-js.png. ⚠ see Known issues (KI-05).

Stacks and slices

ID Title Pri Preconditions / data Steps Expected result
VIEW-170 Slice slider P1 TIFF GFPA_IBA1_…_zstack 1. Drag the Slice slider. Tooltip "Slice through the stack (← / → keys)". The readout shows "z of max", both 0-based (last slice: "N−1 of N−1"). The image follows (debounced while dragging, final on release).
VIEW-171 ← / → keys step slices (Image view) P1 Same stack 1. Hover the image. 2. Press → three times, then ←. The slice steps one at a time.
VIEW-172 Arrow keys ignored while a control has focus P3 Same stack 1. Click into the Min field of Channels & Histogram. 2. Press →. The slice does not change.
VIEW-173 Zoom and pan kept across slices P2 WSI Project002 · … (z=13) 1. Zoom into a corner. 2. Step slices. The view stays where it is; previously visited slices redraw instantly.
VIEW-174 Heatmap single-image mode P2 micro-ct z-stack, Heatmap 1. Look at the stack toggle. 2. Drag the Slice bar and release. Two buttons: "Single image mode" (filled) and "Stack mode". The slice tooltip reads "Slice to plot (← / → keys)". The heatmap re-plots on release (or ~400 ms after keyboard steps).
VIEW-175 Heatmap stack mode P2 micro-ct z-stack, Heatmap 1. Click Stack mode. All frames load with "Loading frames..."; Plotly's own "Z-plane:" slider appears under the plot.
VIEW-176 Z-plane numbering P3 After VIEW-175 1. Compare Plotly's "Z-plane:" labels with the toolbar slider. Plotly numbers from 1, the toolbar slider from 0. ⚠ see Known issues (KI-07).
VIEW-177 ← / → in Heatmap P3 micro-ct z-stack, Heatmap single-image mode 1. Hover the plot, press →. 2. Focus the slice slider, press →. Arrow keys over the plot do not step; they step only while the slider has focus. ⚠ see Known issues (KI-10).
VIEW-178 No slice control in Volume without editor P2 micro-ct z-stack, Volume 1. Look at the toolbar. No Slice slider (until the slice editor is opened).

3D views

ID Title Pri Preconditions / data Steps Expected result
VIEW-190 3D camera controls P1 micro-ct z-stack, Volume 1. Hover each 3D control. Zoom ("Zoom"), Pan ("Pan"), Orbital rotation, Turntable rotation (highlighted by default), Reset camera ("Reset camera to default").
VIEW-191 Rotate, pan, zoom, reset P1 Same 1. Drag (turntable). 2. Pick Pan and drag. 3. Scroll. 4. Click Reset camera. The scene rotates, pans and zooms; Reset camera fits the view back to the default.
VIEW-192 Orbit vs turntable P3 Same 1. Pick Orbital rotation and drag. 2. Pick Turntable and drag. On napari views both behave the same (free rotation). ⚠ see Known issues (KI-04). On Plotly 3D views (test mode) they differ.
VIEW-193 3D axes toggle P2 Same 1. Click Toggle 3D axes / scale twice. Axes with their lengths (µm when known) hide, then show. Default: shown (white icon).
VIEW-194 Wireframe toggle P3 micro-ct slice, Surface 1. Click Toggle wireframe. The surface is drawn as a wireframe; click again to restore. Default off.
VIEW-195 Resolution (Res) P2 micro-ct z-stack, Volume 1. Open Res ("Resolution (decimate factor)"). 2. Pick Full, then ⅛. Options Full / ½ / ¼ / ⅛, default ¼. Each change reloads the view at that detail; the box proportions do not change. ⚠ see Known issues (KI-11).
VIEW-196 Volume Z-height grip P2 micro-ct z-stack, Volume 1. Drag the round blue ↕ grip on the top face up by ~180 px. 2. Double-click the grip. Tooltip "Drag to change the volume height (Z). Double-click to reset." Dragging 180 px doubles the height (clamped 0.1–10×); double-click resets.
VIEW-197 Isosurface band P2 micro-ct z-stack, Isosurface 1. Narrow the Iso slider to 150–255. 2. Widen it to 0–255. Range 0–255, step 1, readout "lo–hi", default 0–255. The surface changes with the band. ⚠ see Known issues (KI-12: band behaviour on napari, band after Res change).
VIEW-198 Multichannel volume P3 TIFF GFPA_IBA1_…_zstack, Volume 1. Open Volume. One tinted layer per visible channel.
VIEW-199 Loading badge P3 micro-ct z-stack 1. Pick Volume and watch the bottom-centre. A pill like "Image reloading…" / "Building … in 3D…" shows (only for loads longer than ~150 ms).
VIEW-200 3D context menu P3 micro-ct z-stack, Volume 1. Right-click the 3D view. Zoom, Pan, Orbital rotation, Turntable rotation, separator, Reset camera.
VIEW-201 Volume view region tools P2 micro-ct z-stack, Volume 1. Look at the region part of the toolbar. Only Region Editor, Selection, Undo, Redo, Delete and the Slice editor toggle are shown.

Slice editor (Volume and Isosurface)

ID Title Pri Preconditions / data Steps Expected result
VIEW-220 Open the slice editor P1 micro-ct z-stack, Volume 1. Click Slice editor. A 2×2 layout: 3D volume (top-left), the slice "Z · slice N" (top-right), section through X "X · n px" (bottom-left), through Y "Y · n px" (bottom-right). The Slice slider appears. Full region tools appear.
VIEW-221 Tooltip toggles P3 Same 1. Hover the button before and after opening. "Slice editor: the slice and the sections through x and y beside the 3D view" / "Close the slice editor"; aria-pressed follows.
VIEW-222 Draw on the slice pane P1 Slice editor open 1. Press f, draw a region in the Z pane. The region appears on the slice and its outline shows in the X and Y sections (translucent).
VIEW-223 Drag the z plane in 3D P2 Slice editor open 1. Drag the z plane's grip in the 3D view. The slice in the Z pane follows; the plane brightens while dragged.
VIEW-224 Click a section to move planes P2 Slice editor open 1. Click a point in the X section. The slice and the other section move to that point.
VIEW-225 Section pane zoom and pan P3 Slice editor open 1. Scroll on a section pane. 2. Drag. 3. Double-click. Zoom about the pointer (0.2–50×); drag > 4 px pans; double-click fits.
VIEW-226 Resize panes P3 Slice editor open 1. Drag the vertical and horizontal dividers. 2. Focus a divider, press arrow keys. Panes resize between 20% and 80%; arrow keys move the divider 5%.
VIEW-227 Editor state kept across plot types P3 Slice editor open 1. Switch to Heatmap. 2. Back to Volume. The slice editor is open again.
VIEW-228 Closing keeps Select, disarms others P3 Slice editor open, f armed 1. Close the slice editor. The freeform tool is disarmed. If Select was armed, it stays armed.
VIEW-229 "Waiting for the volume…" P3 Large tiled stack 1. Open Volume and the editor immediately. Section panes show "Waiting for the volume…" until the volume is assembled.

Intensity profile lines

ID Title Pri Preconditions / data Steps Expected result
VIEW-240 Add a line P1 img01.png 1. Click Add an intensity line. A horizontal line across about two-thirds of the visible image, selected with handles (Select armed). A floating "Intensity profile" panel opens near the top-right with "Line 1".
VIEW-241 Line colours cycle P3 img01.png 1. Add 9 lines. Lines are placed 12% lower each time (clamped to the view); colours cycle through 8 colours (yellow, cyan, pink, green, orange, purple, red, aqua) and repeat.
VIEW-242 Live profile while dragging P1 One line 1. Drag an endpoint across a structure. The trace updates live; x axis "Position (px)" (or "Position (µm)" with a pixel size), y axis "Intensity".
VIEW-243 µm units P2 WSI CMU-1 1. Add a line. x axis reads "Position (µm)".
VIEW-244 Re-sampled at current zoom P3 WSI CMU-1, one line 1. Zoom in on the line and wait. The trace gets more detail once the view settles.
VIEW-245 Delete a line P2 Two lines 1. Click a line to select it. 2. Click the trash tool (or press Del). That line and its trace are removed; the other remains.
VIEW-246 Lines are not regions P2 One line, Region Editor open 1. Look at the Region Editor table. 2. Export GeoJSON. The line is not listed and not exported; Select all does not select it.
VIEW-247 Only in Image and Heatmap P3 micro-ct slice 1. Switch to Contour and Surface. The Add an intensity line button is shown only in Image and Heatmap.
VIEW-248 Move the inset P3 One line 1. Drag the inset by its header. The inset moves.
VIEW-249 Values are display values P3 WSI 2-channel fluorescence 1. Add a line. Values are 8-bit display/preview values (0–255), not native 16-bit values; RGB is converted to luminance.